Terminals requirements

Mechanical structural safety requirements terminals in terms of chemistry and structural materials and moving parts to ensure the safety of live, such as shell edges, hardware aspects of glitches, and various parts of the connection strength, even stable under electrical terminal block exercise conditions sex, above all in the mechanical structure of the power industry requirements for terminals.
2, enclosure protection requirements mainly JB / T 9568-2000 provides for protection class, it is mainly divided into two types, one is solid foreign protection level, one is water damage caused to equipment and products.
3, insulation coordination requirements are mainly based on the materials used, the working voltage and environmental pollution levels, come together to select clearances and creepage distances, thereby protecting the safety of staff and products work, but also make the product does not occur in the over-voltage insulation damage .
4, the tracking index requirement for the product in the course of the surface of the solid insulating materials in the electric field and an electrolyte to form a conductive path, so that the insulating properties of the insulating material housing decline, affecting the safety of the product. If insulation voltage level at the same conditions, tracking index is high, the product creepage distance can be reduced, if the product enters power sector development in this regard, please pay full attention.
5, the thermoplastic material in the work requirements of the deformation, which is mainly of the temperature and the contact resistance of the terminals in the work, the high temperature which causes the deformation of the housing becomes soft, so that the electrical short-circuit, resulting in a serious accident, so the carrier terminals Select the material flow components was very important.
6, electric shock requirements, the structural aspects of the operating element should not be charged, terminal and internal PCB Spring Terminal Block connections should be accessible to this area mainly for screw torque and reliability requirements, should prevent the screw terminals can be touched, Loose wires accidentally shorted. Such as the ground terminal requirements: ground resistance class security products should not exceed 0.5Ω.