Wiring terminals FAQ

1, deformation stitching portfolio digit growth, the main reason is because of the irrational structure of the Falcon lead to the uneven stitching two up and down in front, as shown in the structural design must consider the force and deformation of its splicing Falcon direction. 2, screw anti-out problem, in this regard, I recommend the best Barrier terminal block use of anti neck out, because it is compared with the hoop off avoids anti-mouth screw rod and hoop mouth tolerances annoyance. And reliable construction tolerances easy to control. 3, screws and steel pieces with salt spray test in question after plating, due to the company by 2012 standard thread plating (plating is limited, but much of the thread corresponding coating thickness I think remains to be determined), to solve this problem There are two ways in the plating process under normal circumstances, to choose the right sealer and use of the coating in multiple plating, these two methods are to be covered with the naked eye can not see the screw voids generated. Coating a plurality of times using high cost of electroplating, it is recommended to use the first method, this method is that the key is to study the Plug-in terminal block sealer formulation. 4, insertion force the issue in this regard relates to the content more, it has a relationship with the material, plating, structure and industry applications, the connector industry is an important mechanical performance requirements, plug-in terminal even more so, the choice of materials is limited by the terms of the insertion force conductivity (current) and contact resistance and temperature rise. Here is not to do a detailed description of the plating is mainly affected by the type of coating and plating of whether pre-impact, Generally speaking, in the same material and structure than the first pre-plated compression tableting press and then plated plug power in regard to stability, because after the plating process is the invisible material made of hardened metal , and just prior to pressing to eliminate this phenomenon. The main consideration is the structure of the contact pressure plate and lead the needle, needle and tablet lead exposure, mostly in line contact, which resulted in an instant when suddenly appeared with a big plug, and then suddenly smaller, to customers in process used in a very unstable feeling, affecting their life, if the contact pressure plate and lead the needle into surface contact structure, then not only solve the problem of insertion force and reduces contact resistance and temperature l.