Important factors affecting the selection of the terminal block

1 Appearance factor
Although the "power terminals" The name does not sound nice, but many companies have considered it in terms of appearance and affinity users have played an important role. Power terminals must be easy on-site installation, as they are often mounted on the front panel is easy to  WISDOM Terminal BLOCK see the product. Thus, marketers often want the appearance of power terminal products have a certain voice. But often encounter this situation: engineers design products meet the requirements of all mechanical and electrical parameters, but because the request does not meet the sales had to be changed. If this happens in the final design cycle (often the marketing department when first saw the prototype), then a fierce debate would be difficult to avoid, and may result in increased costs and delivery delays. In many industrial control systems, terminals are often one of the few parts of the few technicians need extra attention. Although its user interface is relatively simple (mainly screws), but it is very important for the normal operation of the device is. In general, as the current increases, the wire becomes rough, and the fastening torque of the  WISDOM HDMI CABLE coarse wire to the terminal also needs to increase needed. Therefore, the need for greater power terminal screws and more robust insulating housing. Sometimes using a small screw to save space. In a very compact product terminals often the case. Some wire diameters up to 1/4 inch or more, and therefore difficult to deal with these small screws. When technicians and maintenance staff need to install multiple lines, using a large enough screws to simplify the connection work can greatly save time. It was also an engineer in the design process to hear the views of marketing departments seem so important as soon as  WISDOM Displayport CABLE  possible. If the terminals must be properly polished or the use of appropriate colors, then as the original product requested by these parameters than at the end of the development cycle to adjust them much easier.
When the terminal is used for consumption (such as high-end stereo products) products, the appearance becomes increasingly important. In fact, some designers tend to specify the terminal device for audio equipment were plated, so that despite an increase in costs and does not significantly improve performance, but it does improve the appearance of the gold-plated products.